Motive Power Fundamentals - Automotive Repair

Select start date and campus

Menu
Close

Applying as a Canadian applicant

Domestic students should apply online or by phone at 1-888-892-2228.

Apply now: Canadian applicant

Applying as an International applicant

International students should apply online.
Apply now: international applicants
Close

Campus tours

Campus tours are one of the best ways to experience Conestoga. During this time, we are offering online guided tours to show you all Conestoga has to offer.

Book your tour

Virtual tours

If you can't make an on-campus tour or attend one of our events, the virtual tour is a great way to visit us.

View our Virtual tour

Courses - January 2025

Level 1

Course details

Automotive Maintenance and Repair
AUTO1467

Description:

In this course, students will be given an overview of motive power safety, WHMIS/GHS, automotive systems, and functional concepts of electrical theories and systems. Students will perform shop tasks including inspection and service of various automotive systems and related components. A major focus of this course will be the development of safe and efficient work habits, while increasing students' familiarity with automotive systems and service.

  • Hours: 154
  • Credits: 8
  • Pre-Requisites:
  • CoRequisites:

Automotive Repair Practices
AUTO1475

Description:

In this course, students will learn about the proper procedures to safely inspect and use various automotive lifting devices, tools, and equipment. Students will learn and perform various maintenance and inspection tasks to industry standards, including the application of precision measurement and associated tools. Online service information software will be used to access maintenance schedules, fluid capacities and specifications, and other trade related information. Students will learn the fundamentals of bearings, gaskets, sealers, and service procedures associated with each.

  • Hours: 42
  • Credits: 3
  • Pre-Requisites:
  • CoRequisites:

College Reading & Writing Skills
COMM1085

Description: This course introduces students to the reading, writing, and critical thinking skills needed for academic and workplace success. Students will analyse a variety of texts and apply the steps of planning, writing, and revising to produce writing that meets the expectations of selected audiences and purposes. The course prepares students for college-level writing tasks, research, and documentation by asking them to produce clear, informed, and purposeful documents relevant to both academic and professional contexts.
  • Hours: 42
  • Credits: 3
  • Pre-Requisites:
  • CoRequisites:

Computer Applications
COMP1280

Description:

This course will introduce students to the use of word processing and spreadsheet software, as well as, operating systems and the Web to produce technical documents.

  • Hours: 28
  • Credits: 2
  • Pre-Requisites:
  • CoRequisites:

Conestoga 101
CON0101

Description: This self-directed course focuses on introducing new students to the supports, services, and opportunities available at Conestoga College. By the end of this course, students will understand the academic expectations of the Conestoga learning environment, as well as the supports available to ensure their academic success. Students will also be able to identify on-campus services that support their health and wellness, and explore ways to get actively involved in the Conestoga community through co-curricular learning opportunities.
  • Hours: 1
  • Credits: 0
  • Pre-Requisites:
  • CoRequisites:

Applied Mathematics
MATH1830

Description: This course is an applied mathematics course enabling the student to utilize arithmetic, algebra, trigonometry and geometry to solve technically oriented problems. This course is designed to develop a proficiency in mathematics necessary for subsequent courses in the Motive Power trades. The course covers both vocational (job oriented) and generic skills (written, analytical and problem-solving).
  • Hours: 42
  • Credits: 3
  • Pre-Requisites:
  • CoRequisites:

Motive Power Business I
MOTV2205

Description: This course will introduce students to the foundations of business both in Canada and globally. Students will study various business structures as well as topics in economics, accounting, marketing, finance and operations management.
  • Hours: 42
  • Credits: 3
  • Pre-Requisites:
  • CoRequisites:

Level 2

Course details

Engine Systems I
AUTO1231

Description:

In this course students will demonstrate a working knowledge of two- and four-cycle internal combustion engines. Course content includes in depth coverage of engine short block components and assemblies.

  • Hours: 42
  • Credits: 2
  • Pre-Requisites:
  • CoRequisites:

Electrical/Electronic Fuel and Emission Systems I
AUTO1250

Description:

This course provides an overview of vehicle fuel, electrical/electronic and emission systems. Content includes fundamental motor operation and components, electronics used in the automotive trade, vehicle emissions and manufacturer installed emission control devices and testing procedures.

  • Hours: 98
  • Credits: 7
  • Pre-Requisites:
  • CoRequisites:

Drive Train Systems I
AUTO1271

Description: This course provides basic coverage of gears, levers and mechanical advantage, and a thorough coverage of manual drive line components including: standard transmissions and transaxles, clutch and clutch controls, drive axle assemblies and differentials.
  • Hours: 42
  • Credits: 2
  • Pre-Requisites:
  • CoRequisites:

Suspension/Steering and Brake Systems I
AUTO1291

Description: In this course students will learn the basic laws governing suspension movement and design, suspension types and their components. Expanding on the knowledge gained in the Introduction to Automotive Service and Repair, this course will also cover braking systems, their components and operation. Through practical activities students will be able to perform inspection and testing on suspension system components and sub-assemblies, repair of tire and rim assemblies, and brake systems all according to manufacturers’ service procedures. This knowledge will constitute the foundation for key concepts studied later in the program.
  • Hours: 42
  • Credits: 2
  • Pre-Requisites:
  • CoRequisites:

Career Launch
CDEV1820

Description: This course prepares students to conduct an effective job search. Students will explore labour market trends to uncover the hidden job market. Students will learn to identify their transferable skills and market them effectively. They will create targeted resumes and cover letters aimed at employers in their field. Students will learn strategies to communicate their skills effectively in an interview. They will explore the skills, attitudes and expectations needed to successfully transition into the workplace. Throughout the duration of this course, a personalized job search plan will be created to support their future career goals.
  • Hours: 14
  • Credits: 1
  • Pre-Requisites:
  • CoRequisites:

Welding for Motive Power
WELD1610

Description: In this course the student will learn the fundamentals of the Shielded Metal Arc Welding (SMAW) and Gas Metal Arc Welding (GMAW) processes as well as oxy-fuel welding and cutting. Topics include safe operating principles, applications, equipment set up and troubleshooting.
  • Hours: 28
  • Credits: 2
  • Pre-Requisites:
  • CoRequisites:
Electives: General Education
Student must pass 1 Course(s), selected in the Student Portal from available course options

Program outcomes

  1. Identify basic motive power system problems by using critical thinking skills and strategies and by applying fundamental knowledge of motor vehicle operation, components, and their interrelationships.
  2. Identify, inspect, and test basic engine components and systems in compliance with manufacturers’ recommendations.
  3. Identify, inspect, and test basic electrical, electronic, and emission components and systems in compliance with manufacturers’ recommendations.
  4. Identify, inspect, and test basic drive train components and systems in compliance with manufacturers’ recommendations.
  5. Identify, inspect, and test basic suspension, steering, and brake components and systems in compliance with manufacturers’ recommendations.
  6. Disassemble and assemble components to required specifications by applying workshop skills and knowledge of basic shop practices.
  7. Use a variety of test equipment to assess basic electronic circuits, vehicle systems, and subsystems.
  8. Apply basic knowledge of hydraulics and pneumatics to the testing and inspection of basic motive power systems and subsystems.
  9. Communicate information effectively, credibly, and accurately by producing supporting documentation to appropriate standards.
  10. Use information technology and computer skills to access data concerning repair procedures and manufacturers’ updates.
  11. Prepare logs, records, and documentation to appropriate standards.
  12. Apply business practices and communication skills to improve customer service.
  13. Develop and use personal and professional strategies and plans to improve professional growth, job performance, and work relationships.
  14. Complete all assigned work in compliance with occupational, health, safety, and environmental law; established policies and procedures; codes and regulations; and in accordance with ethical principles.
  15. Perform soldering operations; welding and cutting using oxy-fuel; and welding using GMAW.